Elma Instruments - sita 3

Kyoritsu K 2031is a small clamp meter in never seen and very convenient mini size. The instrumentet measures AC current and is able to, due to it s size, be used almost anywhere - also in places where it should be impossible to measure with a normal clamp meter. THe instrumentet is equipped with data hold, complies with IEC 61010-1 CAT III 300V, and is delivered in pouch incl. batteries and manual. Technical data: Current: 0-20-200A AC Resolution: 0,01-0,1A Accuracy: ± 2% + 5D Display: 3 1/2 digits Max display: 1999 Clamp size: 24mm Battery: 2x1,5V LR44 (incl.) Size: 145x51x25 mm Weight: 95 g

Elma B-Scope 800 trådløst endoskop Produkt beskrivelse: Om det er kablet der er blevet væk i skillevæggen, inspektionen af svejsningen i røret eller b...

Elma Laser x360-2 med 2 stk. 360 grønne linjer for ekstra synlighed Produkt beskrivelse: Nu har du chancen for at få en high-end 3D laser, med 2 stk....

Elma TPG 250 gas prove instrument which is able to measure up to 250mbar

Elma 2700X spændingstester med åben strømtang Produkt beskrivelse: Med Elma 2700X genopfinder Elma spændingstesteren, endnu engang. Elma 2700X har all...

Kalibrator Elma MS4202 / 0-24mA / 0-10V Produkt beskrivelse: Elma MS 4202 er en lille og håndholdt kalibrator, som både kan arbejde som aktiv og passi...

The new NaviTEK NT is a network tester for troubleshooting and maintenance of active and passive copper and fibre networks. Incorporating an improved graphical interface NaviTEK NT allows network technicians to pinpoint and solve network connectivity issues faster than ever before. Subsequently, tests can be saved as pdf reports and shared with colleagues and clients using the free IDEAL AnyWare app.

Elma DT5500A is a new smart multimeter combined with an insulation tester with superior resolution. The instrument is very robust and fitted with large, easy to read illuminated display with smart analog bar chart. The multimeters measure AC / DC voltage, resistance and continuity. The insulation teste has optional test voltages 125, 250, 500 and 1000V, and lockable test function. Elma DT5500A have automatic discharge of capacitive voltage and automatically warns of dangerous voltage if attempting to perform an insulation test on live installations. The instrument has automatic range selection, data hold and min / max measurement. Elma DT 5500A is equipped with integrated rubber protection casing and meets IEC CAT III 1000V / CAT IV 600V. The instrument comes complete in bag incl. test leads, batteries and instructions. Technical data: Test voltage: 125, 250, 500 and 1000V Insulation Resistance: 0-4M-40M-400m-4000M Resolution: 0.01 M Test current: 1mA Voltage: 0-750/1000V AC / DC Resistance: 0-40-400 Batteries: 6x 1.5 V LR6 (inclusive) Dimensions: 200x92x50 mm Weight: 700g

Elma 2500 current clamp with an open current clamp, 200A AC.

Combitest 422 installationstester Produkt beskrivelse: Installationstest, verifikation ved idriftsætning, slutkontrol, afleveringsrapport, 60364 teste...

Elma 2100X IS A NEW unique voltage-/continuity tester for extra high safety and with a lot of smarte details. Like: long flexible wire, smart fixed connection of the test probes with a distance so that they fits directly into a socket. Test probes with both 2 and 4mm diameter and integrated Protection cap. Elma 2100X has both a digital display, LED s and a lot of extra features, which makes the worh a lot more easy, and more safe. The instrument has automatically switching between the different funktions, and the voltage detection does also work without batteries. • Voltage test, 2 pole with LED s (12-690V AC/DC) • Voltage measurement with digital displaying (7-800V AC/DC) • Voltage detector, one-pole voltage test which indicates the phase • Fase sequence test, 2 pole for 3 phase supply • Continuity test with LED and acustical signal • Real voltage test also without battery • Automatical self test function. • Automatical On/Off – no buttons. • Build-in extra powerfull flashlight. • Double insulated, IP65, GS passed and cat IV 600V. Elma 2100X is delivered incl. standard LR03 batteries and complies with IEC 61243-3, EN 61010-1 cat. IV 600 and TUV/GS. The testers are IP65, person protected up to 690V earth potential and double insulated. TECHNICAL DATA Voltage range indication: 12, 24, 50, 120, 230, 400 og 690V AC/DC Digital displaying: 7,0 – 800/720V AC/DC Test current: < 3,5mA Voltage detector: 100-690V AC Continuity: 0-400 k Phase sequence: 2 pole principle, 200-690V 50/60Hz Working temperature: -15...55°C Safety: IEC 61010-1 CAT IV 600V / CAT III 1000V. IEC 61243-3 / 61010-031 / 61557-7, TUV/GS, double insulated Protection class: IP65 Wire: Silikone Battery: 2x1,5V LR03 (inkl.) Size: 246 x 64 x 29mm Weight: 190g

Metrel S2026 earth set 20m - Complete accessory for ground resistance measurement in a bag.

Type 5004, extra powerfull, isolated crokodile clip, 1000V/20A. Technical data: IEC 61010: Cat III 1000V

Testprobe black = 140mm

Elma 711 is the robust and wellknown thermometer, able to measure temperatures all over the industrial applications. To meet growing wishes from the costumers, Elma 711 is now upgraded with an internal memory function. It is now possible to store the measurements in the memory of the instrument. There is room for 99 measurements in the memory. Elma 711 is thet "smallest" in this serie, and it is equipped with the most common and necessary functions to meet the requirements for a professional thermometer. Elma 711 is designed for type k-probes, whick is the most common probe in industrial applications. Elma 711 has the coorect ergonomical design, that does, that the use of the instrument can be made with only one hand, eventhogh all the extra features which is present in the instrument . The display, with the size 56mm x 53mm makes the reading of the values very easy. The instrument has buttons for max-hold, optional unit°C/°F, display resolution in 1°C or 0,1°C. In the function max-hold, the instrument is measuring continuesly, and the displayet shows the highest temperature present. The “MAX" symbol is in the display. The user freindly buttons are constructed thus a shift between the function are done very easily. Elma 711 shall be used together with type k-probes.

Elma Laser R107 Modtager Produkt beskrivelse: Detektor til hele Elma x360 serien.Detekterer grøn linjelaser med pulsfunktion på afstande op til 50 met...

4 mm, fully isolated, handy format, for 4 mm banana plug. Technical data: IEC 61010: 33V AC / 70V DC

Standard probe – Type K Ni-CrNi. The probe is delivered with spiral cord and insulated handle. Technical data: Measuring range: -50....max. +450°C Size: 130x5 mm

Elma 608 is an easy and small IR thermometer made in a practical pen size – fits right in the shirt pocket. The instrument measures surface temperatures without contact. Easy and fast. Elma 608 is provided with a unique circular laser marking, making the area of measurement clearly visible. Furthermore the instrument is equipped with min/max/hold function and a clear, backlit display. The instrument is delivered ready to use including batteries.

Elma 43 LAN cable tester is a small and user-friendly instrument for easy and fast cable testing. The instrument can test both on patch cables as well as directly on the installation using the included remote control unit. It can be tested for i.a. review, short circuits, interruptions, crossed pairs and faulty connections, the installation must be voltage-free during testing.The test results are displayed with colored LEDs and you can choose between loop and remote adapter tests, as well as between manual and automatic tests. The instrument is delivered complete in a bag incl. instructions, battery and adapters for i.a. RJ45 / RJ11 and BNC.TECHNICAL DATACable length for test: 0.1-300mConnectors: RJ45 / RJ11 and BNCBattery: 9V 6F22 (incl.)Dimensions: 127x54x34mmWeight: 120g

Mini tømmeaggragat R32, 2 kompres, 730W Produkt beskrivelse: VRR-24L-R32 fra Value, er en højt ydende tømmestation, der er anvendelig til mange forske...

Red 100cm Quality test leads with fixed hood, double insulated high flexsible silicone, 0,75 mm2 12A with insulated stackable 4 mm safety banana plug. Technical data: IEC 61010: CAT III 1000V, CAT IV 600V

Type 1076 is a multi-blade 4 mm banana plug for stacking and with fixed protection hood. The wire is clamped with an Allen key. Technical data: IEC 61010: Cat III 1000V, Cat IV 600V

5,70331766e+12

Elma 6400 is a robust LCR meter with many areas and functions. The instrument has a large dual display with bar graph and backlight that clearly shows the exact measurements. Elma 6400 finds itself in the right area with intelligent autorange - it couldn't be easier. The instrument is suitable for checking various electronic components and for testing coils and motor windings.