Elma Instruments

Zircon HD70 Stud and Steel Rule Finder Product Description: Zircon HD70 OneStep® is a smart and practical tool for quickly locating wooden and metal studs. The stud finder has a display that indicates signal strength and the location of the instrument in relation to the stud. As something completely new, the tester lights up red precisely when the center of the stud is found. When dangerous AC voltage is detected, the instrument warns with a clear sign in the display. The instrument comes with an operating manual.

Technical specifications:

• HxWxD (mm): 180x74x34
• Weight (grams): 159
• Battery type: 9V 6F22 (not included).

MultiScanner HD900c OneStep multifunction stud finder locates studs, metal, and live AC electrical wiring behind walls, floors, and ceilings. The advanced ColorTrip display lights green in stud scan, blue in metal, and red in live AC scan modes. Screen flashes, or lights, red to alert the presence of live AC in Stud, DeepScan, and Metal Scan modes. A 4-mode switch makes it easy to change modes, while the ultra-bright display screen, SpotLite Pointer, and audio tone all indicate the location of the target.

The brand new Elma Laser x2 line- and X laser is equipped with the latest technology, using green laser light, for enhanced visibility. The human eye is about 4 times more responsive to green light, than classic red, increasing the visible range remarkable, both in- and out doors. Elma Laser x2 provides perfect markings even in long range, eliminating the need to draw on the floor, walls and ceilings. This makes the task of installing shelfs, paintings, kitchen tables etc.Elma Laser x2 is indicating horizontal, vertical or both, in an angle of nearly 180 , for perfect leveling, even right above the instrument. Fast and easy, and you have both hands free to work. Just place the laser and turn it on, it's as simple as that.Forget about time consuming, accurate leveling of the instrument. Elma Laser x2 is self leveling, and if the deviation is too big, the laser will indicate by fast blinking, making operating error impossible. Besides horizontal and vertical lines, you are able to make straight lines in sloping angles, useful e.g. for stairways etc. Lock the Elma Laser x2 to deactivate the self leveling mechanism, and set the angle, simply by placing on standard tripod or on the supplied magnetic adapter. When the leveling is locked, the instrument will indicate, by blinking every 3 second, to prevent mistakes. As additional safety against errors, Elma Laser x2 can't be turned off, when the lock is deactivated, securing the pendulum suspension against transport damage.Elma Laser x2 cross laser is delivered ready to use in nylon bag, including batteries, manual and magnetic adapter.

The Leica DISTOTM D110 is world’s smallest laser distance meter with integrated Bluetooth® Smart technology. By using its precise measurements users can create floor plans and sketch easily by connecting it with the Leica DISTOTM sketch app on a smartphone or a tablet. Whether an interior designer, painter or building contractor, the Leica DISTOTM D110 will make it easier to get the job done right.Distance and area measuringBluetooth® SmartIP 54 dust and splash water protectionRemovable pocket clip

Elma 1000A is a handy safety voltagetester with smart design features. The instrument has a clear LED indication of relevant voltages and automatically polarity indication. The tester has a smart connection with 19mm spacing to fit directly into the wall socket and allows one-hand operation. Elma 1000A is performed in IP 54 and meet particular IEC 61010-1 CAT III 690V and EN 61243-3.

Elma Laser x360-3 med 3 stk. 360 grønne linjer for ekstra synlighed Produkt beskrivelse: Nu har du chancen for at få en high-end 3D laser, med 3 stk....

Elma DT-128M provides a very fast way to non destructive measurement of moist in building materials and moist distribution in e.g. walls, ceilings and floors. The instrument injects a high frequency signal in the material and measures the moist 20-40mm n the material. Just hold the ball-tip against the surface and the moist is immediately shown in the large, backlit display. Elma DT-128M is equipped with 2 adjustable alarm limits, auto zero adjustment, min/max, auto power off and display hold. The instrument is provided ready to use incl batteries and manual. Note: The material to be measured should be at least 20-40mm (depending on the material) to provide a reading.

Elma BM 251 is a new handy multi meter with a lot of funktions and build-in PC-communication. The instrument measures current, voltage, frequency, resitance and continuity. The instrument has build-in non contact detecting of electrical fields, which can be used for detecting electromagnetical fields from PC screens or as non contact voltage detector. Elma BM 251 has optional automatical/manual range selection, intelligent auto power off, relative measurement, and data hold. With THe PC-communication and Windows software (extra accessorie) is it possible to make ON-Line data logging. The instrument is warning against misconnection and has hogh effective fuses. Complies with IEC 61010-1 CAT III 600V and is delivered incl. rubber protection, test leads, batteries and manual. Technical data: Voltage: 0-60m-600m-6-60-600-1000V AC/DC Accuracy: DC: ± 0,5%+2D, AC: ± 1,%+3D Current: 0-500-5000-50m-500m-5-10A AC/DC Accuracy: DC: ± 0,5% + 3D, AC: ± 1,0% + 3D Resistance: 0-600-6k-60k-600k-6M-60M (600V) Frequency: 10Hz - 50kHz Display: 3 5/6 digits Max. display: 5999 Battery: 2x1,5V LR03 (inkl.) Size: 161 x 80 x 50 mm Weight: 340 g

Elma 2200X spændingstester Robust med 30mA belastningstest Produkt beskrivelse: Med Elma 2200X genopfinder Elma spændingstesteren, endnu engang. Elma...

Elma 106 indicates AC voltage without the need of touch. When the voltage is present (phase) it is indicated by the presence of a strong and clear orange light. Elma 106 is ideal for monitoring: - Fuses - Secure sockets without separation. - Cables and wires, use it to search for wire breakage points. Elma 106 meets EN 61010-1 CAT III 1000V/KAT IV 600V and comes complete incl. guidance and batteries. Technical data: Voltage range: 100-1000V AC Batteries: 2x1, 5V LR 03 (included) Dimensions: 144x17 mm Weight: 50 grams

Elma Laser x360-4 med 4 stk. 360 grønne linjer for ekstra synlighed Produkt beskrivelse: Nu har du chancen for at få en high-end 3D laser, med 4 stk....

When you make an insulation test on curcuits with elektronical equipment included, you should connect all phases and neutral together, during the measurement. In this way you are shure about, that there will be no potential between the leads, and therefore you will avoid accidents with electronical equipment and sensitive equipment. With the new Easy-ISO it is even more easy to make above written connections, and then make the measurement. Easy-ISO includes four Ø6,6 mm magnetical probes and a 4-pole test lead, which is connected together as one test lead. The magnetical probes are holding the wire fixed automatically on the measuring point, not using any other helping tools. An insulation test is made on an installation with no voltage present. Disconnect eg. on the RCD and connect the Easy-ISO on the downstream on a 4-pole curcuit breaker. If all the groups on the curcuit breaker is on, then you normally is able to measure the hole installation at once. Using this method all the installation is shortedit is important to disconnect Easy-ISO, before turning on the voltage. Elma Easy-ISO leveres i lille taske og opfylder IEC 61010-1 KAT III 600V. Technical data: Current: max 2A IEC61010: Cat III 600V

Elma tripod/camera stand in aluminum with adjustable height 46-160 cm, suitable for use as a stand for devices such as cross and rotary lasers, distance meters, and other equipment with a standard 1/4-inch thread.

Delivered in a nylon bag with a tilt head.

Elma BM2805 Multimeter, sand RMS Produkt beskrivelse: Elma BM2805 er et robust, sand RMS multimeter med bagbelyst LED-display samt max- og datahold. I...

Smoke pen including 6 pieces of smoke sticks. Burn time: 30min/stick

Elma1500B is a new small and handy tester with 3 Features: - Test voltage 12-690 V AC / DC, 2-pole with LED indication - Analysis Test with both audible and visual indication - Unipolar phase indication The tester has smart fastening testprobes with 19mm spacing to fit directly into the socket and enables one-hand operation. The instrument has no buttons and switches automatically between the different functions so that it can not be error controlled. Elma 1500B uses standard batteries, and for extra security work voltage test function even without batteries. Elma 1500B are in abundance class IP 54 and meet particular IEC 61010-1 CAT IV 300V and CAT III 600V and EN 61243-3. Technical data: Voltage test: 12, 24, 50 and 120, 230, 400 and 690 V AC / DC Frequency: 0-65 Hz Continuity: 0-200 k Voltage: 100-690 V Battery: 2 x 1,5V LR03 (Inclusive) Dimensions: 205x67x27 mm. Weight: 130 g

Elma BM 257 is a new smart mini mult imeter, which gives two new exiting functions. Auto Check is an intelligent function which automatically detects and choose AC voltage, DC voltage and continuity test/resistance. All you need to do is to turn on the instrument and measure. Low Z is voltage measurement with a low impedance, which means, that the measuring point is loaded, and therefore is it the real voltage you are measuring. The instrument has build-in non contact detection of electrical fields, whick can be used to detect electromagnetical fieds from PC screens, or used as a non contact voltage detector. Elma BM 257 measures true RMS current, voltage, resistance, frequency, capacity, continuity and temperature. Elma BM 257 has backlighted display with analog bargraph for easy and quick reading. The instrument is equipped with automatical/ manual range selection, relative measurement, Peak hold, min/max, datahold and intelligent auto power off. With the PC-communication and the Windows software (extra option) is it possible to make ON-Line data logging. The instrument is very safeand robust. It can handle ffailure connection and is equipped with high efficiency fuses. Complies with IEC 61010-1 CAT III 600V. Elma BM 257 is delivered incl. rubber protection, test leads, temperature sensor (wire sensor -50 til +250°C), battery and manual Technical data: Voltage: 0-60m-600m-6-60-600-1000V AC/DC Accuracy: DC: ± 0,5%+2D, AC: ± 1,%+3D Current: 0-500-5000-50m-500m-5-10A AC/DC Accuracy: DC: ± 0,5% + 3D, AC: ± 1,0% + 3D Resistance: 0-600-6k-60k-600k-6M-60M (600V) Capacity: 0-60n-600n-6-60-600-3000F Frequency: 10Hz - 50kHz Temperature: -50...1000°C, (included wire probe -50...250°C) Diode test: 0-1000mV, 0,56mA < 1,8V DC Continuity test: < 10 akustical signal Display: 3 5/6 digits Max. display: 5999 Battery: 2x1,5V LR03 (inkl.) Size: 161 x 80 x 50 mm Weight: 340 g

Red/black 1000V/12A Kit including 1 red and 1 black silicone test lead 0,75 mm2, 100 cm. Equipped with 4 mm banana plug with protection cap and and test stick with the possibility of conenction on a clip etc. Complies with IEC 61010-1 CAT II 1000V. Technical data: IEC 61010: Cat II 1000V

The EEx approved Magnet Stick is an instrument for testing for the presence of magneticfields. By simply holding the tip of the instrument near the test area, it indicates a magneticfield by glowing. The test lamp responds to all kinds of magnetic fields, from alternating currentto direct current and permanent magnets. (Sensitivity 300 gauss 0,3 mT). The ATEXand IECEx approvals are confirmed by NEMKO. (II 2G EEx ib IIC T4).APPLICATIONS:– Testing operating solenoid valves in pneumatic and hydraulic control equipment– Testing relays with coils and electrically-controlled solenoid valves in all types of vehiclesand machines– Testing solenoid valves when servicing oil burners

ATEX-approved voltage detector non-contact can tell if there is AC voltage present. If there is voltage present it will be indicated with a powerfull and clearly orange light. Volt Stick EX is perfect in controlling of eg.: - Fuses, without takeing them out. - Sockets. - Cables and wires, will find the an opening through the insulation. - Serial connected light chains, here it will find broken lights. Elma Volt Stick EX complies with IEC 1010-1 CAT III 1000V, EX: II 2G EEx ib IIC T4 and Nemko 03ATEX1456 and is delivered incl. manual and batteries. Technical data: Voltage range: 230-1000V AC Batteries: 2x1,5V LR 03 (incl.) Size: 146x 22 mm Weight: 40 g

5,7033174717e+12

Elma 9200BT is a rugged TRMS AC/DC clamp meter equipped with build in Bluetooth. The instruments measures current, voltage, frequency, capacity, temperature, duty-cycle, resistance and continuity. Furthermore the instrument has a dedicated setting for external current clamp to measure as much as 3000A AC (Elma flex 430).Using the Bluetooth function and the free App, Elma Link, available for iOS and Android, Elma 9200BT is an easy tool for documentation. Watch the display on your mobile device and perform the measurements in safe distance from dangerous voltages. Record values and trends on your phone and save with attached photo documentation for easy sharing by mail etc.Elma 9200BT is equipped with a large, back lit display and has built in LED torch light, voltage detector, data hold, rel/max/min and auto power off. The instrument fulfills EN61010-1 CAT III 600V and is provided in bag incl. test leads, temperature wire sensor, batteries and manual.

Type 1076 is a multi-blade 4 mm banana plug for stacking and with fixed protection hood. The wire is clamped with an Allen key. Technical data: IEC 61010: Cat III 1000V, Cat IV 600V

Elma BM037 is a small and handy clampmeter designed for measuring True RMS AC and DC currents. Using this handy clamp multimeter, it is possible to measure currents as high as 600A. The multimeter function offers measurement of voltage, current, capacity, resistance and continuity. Besides the clamps function, the instrument is also measuring 0-2000 micro amperes on the sockets. Furthermore the instrument is equipped with temperature measurement, capable of measurements using standard type k sensor, for measuring numerous applications. The AmpTip function provides the opportunity to measure currents from 0-60A with enhanced accuracy.Elma BM037 is equipped with back lit display, min/max/rel, peak hold and voltage detection. Elma BM037 fulfills IEC 61010-1 CAT III 600V and CAT IV 300V and is delivered ready to use in bag including test leads, temperature sensor, battery and user manual.