Danfoss - sita 22

Danfoss SSM underfloor heating manifold in stainless steel with output for 8 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss SSM underfloor heating manifold in stainless steel with output for 9 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss SSM underfloor heating manifold in stainless steel with output for 12 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

AB-QM DN 25 Dynamic flow limiter, with test plugs, external thread G114A, PN25, flow range = 220-2200 l/h

Danfoss radiator valves with pre-setting are used in two-pipe water based heating systems to ensure optimum distribution of the water in a heating system

The DEVImat TM 150T (150W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.

Danfoss 003G1015 rörmokeritillbehör

The DEVImat TM 150T (150W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.

Danfoss AME 10 24V electrical actuator. 0-10V for valve types VS2, VM2 (DN15 + 20 Kvs 6.3) VB2 (DN15 + 20) and VMV30 (DN15-40)

Danfoss AVP differential pressure controller. Self-acting differential pressure controller primarily for use in district heating systems. The controller closes on rising differential pressure. The controller has a control valve, an actuator with one cont

Danfoss insulation cap for AB-QM DN32Tailpieces, union connections etc. for AB-QM

Danfoss AFP pressure actuator controler. Pressure actuator with control diaphragm and spring for differential pressure setting. Combined with valve type VFG and VFQ it is a self-acting differential pressure controller primarily used in district heating

Danfoss 065Z0154 rörmokeritillbehör

For those who want to extend the wireless signal range.

AF, 15 cm Ø10x1 curør, nip G 1/4, clamping ring research

Return coupling with shut-off and draining, valve body, type RLV DN 10, continuous. The return coupling type RLV makes it possible to shut off each individual radiator, e.g. for maintenance or repair, without affecting the other radiators in the system.

Danfoss radiator valves with pre-setting are used in two-pipe water based heating systems to ensure optimum distribution of the water in a heating system

Danfoss SSM underfloor heating manifold in stainless steel with output for 11 heating circuits and flow meters. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is with a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

EV210A covers a wide range of small, direct-operated 2/2-way solenoid valves for use in industrial machinery.The compact design together with the broad range of coils means that EV210A covers a broad variety of industrial applications.

DEVImat TM 100T (100W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.

Danfoss 003H6239 tryckregulator

Cable for ABNM A5 1 meter, halogen free (0-10V). REMEMBER 406848800 AND 460947976

Spare part Service kit EV220 15 EPDM 032U1071 from DANFOSS A/S

Danfoss RTX valve set. The valve sets are prepared for the control of towel-rails and design radiators. The sets includes a thermostatic valve complementing lock shield valve and a matching sensor. They are available in the colours white and chrome.

Cable plug for Coils