Danfoss - sita 20

RT switches are used in general industrial and marine sectors. The RT single pressure switches series consist of a variety of ordinary controls including neutral zone pressure switches, safety pressure switches for steam boiler plant, and gold plated fail

RT switches are used in general industrial and marine sectors. The RT single pressure switches series consist of a variety of ordinary controls including neutral zone pressure switches, safety pressure switches for steam boiler plant, and gold plated fail

In the KPS series, special attention has been given to meeting important demands for a high level of enclosure, a robust, compact construction and resistance to shock and vibration. The KPS range covers most outdoor as well as indoor application requireme

The DEVImat TM 150T (150W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.

The DEVImat TM 150T (150W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.

DEVImat TM 100T (100W / m2) is a thin heating cable mat, self-adhesive all-in-one mat, with a very low recess height of only 3.5 mm, perfect for renovating existing floors. The heating mat can be used for both total and comfort heating.DEVImat TM is a 360 ° fully shielded double-conductor heating cable of extremely high quality, with FEP insulated conductors and red PVDF outer casing (non-UV resistant). The round profile and robust construction ensure a quick, easy and secure installation.The cold lead is a solid cable installation cable that ensures quick installation. A clearly visible assembly prevents accidental installation of the heating cable in the wall.

MBS 1700, Pressure transmitter for general purpose,Pressure transmitter, type MBS 1700 is designed to a variety of applications and easy installations within the distributor market. The transmitter offers highly reliable pressure measurement, ensuring that even the slightest change is detected immediately.,•4 – 20 mA output signal,•Measuring range 0 - 25 bar,•Pressure connection G1/4 EN 837 and G 12 EN 837,•Temperature compensated and laser calibrated,•Excellent vibration stability,•Easy installation – fit and forget

Return thermostat for automatic regulation of the return water temperature from hot water tanks that are directly connected to the district heating system.

The Danfoss FHM-C1 shunt is used for regulating the floor heeating.

Union for the seat valves VRB and VRG.

Danfoss RTX valve set. The valve sets are prepared for the control of towel-rails and design radiators. The sets includes a thermostatic valve complementing lock shield valve and a matching sensor. They are available in the colours white and chrome.

For those who want highly advanced control options including cooling operation and supply temperature controlFeatures Expansion module • Required module• Sends and receives wireless signals between room thermostats and Master Controller

For those who want to use demand based supply temperature.Features Thermal actuator• Special actuator for demand based supply temperature functionality• IP54, protected against dust and splashing water

Valves with pre-setting are used in water-borne two-line systems to ensure optimal distribution of the water in the heating system. Pre-set.

Danfoss compression fittings. Compression fittings for connecting Danfoss valves with steel and copper tubings.

The Danfoss Dynamic Valve is an innovative two-in-one radiator valve. It combines a thermostatic radiator valve for accurate temperature control with an automatic adjustment valve – all in the same valve. The built-in pressure difference regulator eliminates the pressure fluctuations in a 2-string heating system. The preset scale with 1-7+N is used to limit the maximum flow between 25-135 l/h. By using Dynamic Valve, a perfectly controlled and regulated heating system is achieved.

Danfoss adaptor for AMV-AME 435 motors. For old valves type VRB, VRG, VF and VL. DN 15-50

Danfoss RA-KE assemblies. Manifold assemblies (normal flow, with or without pre-setting) are universal pipe connectors and regulating valves for radiators. An assembly comprises: A radiator valve, a manifold valve, connection pipe and compression fittings

Valves with pre-setting are used in water-borne two-line systems to ensure optimal distribution of the water in the heating system. Pre-set.

Danfoss ESMU 250 Immersion sensor. Immersion sensor available in copper or stainless steel with two-wire devices. All connections are inter-changeable.

Danfoss 003N8253 vvs-ventil Reglerventil

Danfoss 065F0020 rörmokeritillbehör

Adaptor for RAV valves.

Danfoss 082H8039 rörmokeritillbehör

Danfoss SSM underfloor heating manifold in stainless steel with output for 10 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.