Wera - sita 3

L-nyckelsats, 9 delar, i hållare

High quality spacer out of aluminium: the screwdriving depth can be infinitely adjusted and allows the flush-mounting of screws.

Typically Wera designed robust textile belt with 9 sockets taking up minimal space. A smooth turning Twist to Unlock mechanism ensures a secure fit and simple removal of the sockets. Comes with „Take it easy“ Tool Finder with colour coding according to size to enable the right tool to be selected easily and quickly. Includes a snap hook for secure fastening to a belt loop or pocket. Supplied with a nonwoven reverse side and hook and loop strips for simple attachment e.g. to a wall, shelf, tool trolley and to the Wera 2go tool transport system.

Wera 05006190001 Manuell skruvmejsel Enstaka Rak skruvmejsel

Bit set with handle and inter-changeable blades

Wera 334/6 Kraftform Uppsättning

The Wera 2go 4 Tool Quiver with an individually adjustable partition for screwdrivers and other tools.

Skruvmejseluppsättning, 13 delar

3-piece screwdriver set with Kraftform Plus handle for pleasant, ergonomic working that prevents blisters and calluses. Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. "Take it easy" Tool Finder with colour coding according to sizes. The hexagonal anti-roll feature prevents any bothersome rolling away at the workplace.

Tough-absorbing bits for universal use. BiTorsion bits with an elastic torsion zone – where kinetic energy is diverted from peak loads – and softer BiTorsion zone to prevent the bit tip from twisting under high strain. This greatly extends the product service life. Offer the best possible service life with the appropriate holder. Comes with Rapidaptor technology, which allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward – for rapid bit change with just one hand. For the take-up of bits with 1/4" hexagon head drive as per DIN ISO 1173-C 6.3 und E 6.3. For insertion in the power screwdriver or into the chuck of the power drill. The multi-component Bit-Check is convincing on account of its low weight and the maximum possible degree of compactness. In this respect, the soft material in the lower section of the Bit-Check ensures that the bits are securely held whilst being simple to remove at the same time. The profile and size of the bits are easy to recognise thanks to the Wera "Take it easy" Tool Finder with its colour coding and clearly visible imprint.

Rapidaptor universal holder for bits with hexagon head drive as per DIN ISO 1173-C 6.3 and E 6.3 (ISO 1173). The floating, free-turning magnetic sleeve securely holds even large and heavy screws. The Rapidaptor allows bits to be attached without any need to actuate the sleeve. The removal of the bit is simple, just by pushing the sleeve forward. This enables rapid bit change with just one hand. ¼” hexagonal, suitable for power screwdrivers with take-up as per DIN ISO 1173-F 6.3.

Screwdriver handle with bit set, 19 delar, i bärpåse

T-handle screwdriver: The ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The
ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand
makes contact with the handle and friction losses between the hand and the handle are avoided. With holding function (HF) to securely
hold the TORX® screw on the tool. Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw
head.

Wera 889/4/1 K Uttag

High quality bit holder with strong, permanent magnet that holds the bits absolutely securely. Kraftform handle for pleasant, ergonomic working. Kraftform Plus: Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. Suitable for bits with 14" hexagon head drive as per DIN ISO 1173-C 6.3.

L-nyckelsats, 13 delar, i clip-holder

Wera 05028150001 Manuell skruvmejsel Enstaka Rak skruvmejsel

7-piece nutsetter set by Wera. Hollow shaft for the fastening of threaded rods; only then can the threaded rod with nut slip into the hollow shaft. Multi-component Kraftform handle for high working speeds and particularly ergonomic screwdriving. Hexagonal anti-roll feature prevents any rolling away and handle markings make for simplified finding and sorting of the tool; for hexagon head screws.

Wera 8784 A1 Uttag

Tire jack set, 2 delar, 1/4"

Especially small bit-holding Stubby screwdriver handle with short blade for hard to reach areas. Suitable for the mounting of bits with ¼"
hexagon drive as per DIN ISO 1173-C 6.3 and Wera connection series 1.With strong permanent magnet, which also holds large and
heavy screws. The 2-component Kraftform handle with its practical combination of hard and soft zones allows for a firm grip and precise
working. The hexagon anti-roll protection prevents annoying rolling away of bits in the workplace.

The Wera Mini ratchet. Simple operation, even with just one hand, in confined working spaces. Drop-forged, full-steel design and fine-pitched mechanism with 60 teeth that allows a small return angle of 6° for precise working. The thumbwheel allows rapid fastening in confined situations when there is no space for ratcheting. Easy left/right switchover. Ergonomically designed ratchet head and lever. Suitable for ¼” bit and socket take-up.

High quality Wera Micro screwdriver set for precision mechanical work. Rapid twisting is possible by fixing the hand on the twist cap and using the fast-turning zone just below it. This makes time-consuming grip adjustments unnecessary. Power zone with integrated soft zones ensure the transfer of higher tightening and loosening torque. Precision zone for the right angle for adjustment work. The Wera Black Point tip offers high corrosion protection and an exact fit. Includes practical rack for tidy storage of the screwdrivers.

Wera 05020302001 blocknyckel

Ratcheting torque wrench with bit and socket set, 16 delar, 1/4", 2.5, 25 N·m