PEX-system - sita 9

Used for connection between Pex/Alu and pipe, valves etc. with thread

Manifold cabinet for Roth floorheating manifold

Transition from 22 mm to pipe thread.

Pipe strap for fixation of pipe, 25mm. UniteScrews included

Manifold cabinet for Roth floorheating manifold

Uponor 1042331 rörmokeritillbehör Ändmatare, förminskning

Pair of termination boxes including two Q&E termination elbows in DR-brass with white Q&E rings, metal mounting bracket for mounting c/c 150mm and mounting screws. For water proof connection with PE-Xa pipes and Uponor conduit in all types of walls, according to NT VVS 129.

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Complete adapting set for polyethylene pipe. Brass

Wall bracket for 3/4" manifold, set of 2 pcs

Brass manifold with 2 outlets for water- and heatingsystems.

Manifold made of DR brass. Supplied with compression fittings.

Roth manifold in gunmetal for pex pipe

PPM modular distribution pipe system for domestic water in PPSU (polyphenyl sulfone). With bayonet sockets, comes with O-ring for external thread. Branches with bayonet coupling system, so that it can be used for several different adapters and transition pieces. Coupling system may only be used with Ator's PE-Xa tubes and Q&E adapters or MLC tubes and pressure adapters.

Manifold cabinet for Roth floorheating manifold

Roth female tee 15 x 15mm x 1/2" for PEX, CU and Stainless steel

PX-T-rör för PEX-kompressionskopplingar, Tiemme px-tee är en T-koppling för installationer av PEX-rör och kopplingar.

Tiemme px-tee tillhör kategorin T-kopplingar för PEX och presenteras som en kompressionskoppling för användning inom PEX-kopplingssystem.

Ett enkelt kopplingsval när du behöver en Tiemme px-tee för PEX-tillämpningar.

PEX-nippel från Tiemme är en koppling för PEX-rörinstallationer, listad i kategorin för kompressionskopplingar, hylsor och nipplar för PEX.

Tiemme PEX-nippel är avsedd för användning vid PEX-relaterat rör- och kopplingsarbete där en nippelanslutning krävs.

Ett praktiskt val för att hålla PEX-installationskomponenter matchade till rätt kopplingskategori.

PEX-nippel från Tiemme med storleken 1/2", utformad som en kopplingskomponent för PEX-rörinstallationer.

Tiemme PEX-nippel tillhör kategorin PEX-kompressionskopplingar och används där en nippelanslutning krävs i rör- och kopplingsarbete.

Ett praktiskt val för att slutföra PEX-kopplingsanslutningar med en tydligt angiven storlek 1/2".

PEX-koppling från Tiemme är en PEX-kompressionskoppling som finns i flera listade rörstorlekar för VVS- och rörinstallationsarbeten.

Tiemme PEX-koppling är utformad för användning med PEX-rör och är listad i flera storleksvarianter, inklusive alternativ för vanliga PEX-rördiametrar.

Ett praktiskt kopplingsval för att matcha PEX-röranslutningar i professionella VVS-installationer.

Uponor 1001337 rörmokeritillbehör Ändmatning ändlock

Wallbox for 15 mm pex pipe, in gunmetal.