Mätinstrument - sita 3

Complete brass water meter connection union. With NBR rubber washer. Non dezincifiable alloy.

JCH Bronze meterunion with controllable non-return valves Type 2286 is manufactured in Bronze-Alloy CC499K. Ensured against corrosion in all legal water qualities.meterunion with controllable non-return valve that meets the standards of drinking water.meets the requirements for backflow protection medium category 2 family EB according to EN1717.

DIN 862, with locking screw and fine adjustment, chrome plated, inox hardened.

Golf-laseravståndsmätare Redtiger GolfVue Series 4 kombinerar en premium OLED-display, fem ljusstyrkenivåer, 7× förstoring och mätområde upp till 1,200 yards.

Den levererar ±0.5-yard noggrannhet med snabb flagglåsning och vibrationsfeedback, medan lutningskompensation kan stängas av för tävlingsgodkänd användning.

Magnetisk montering, USB-C-laddning och IP54-skydd gör den till ett praktiskt val för exakt avståndsmätning på golfbanan.

KNIPEX 87 02 250 T Cobra® Hightech polygriptång Med flerkomponentsöverdrag, med inbyggd fästögla för fallskydd grå, försedd med korrosionsskydd 250 mm

Manometer 1/4XØ63 0-4 bar/0-40 MVS, downward stud.

Brass thermowell, 12 x 100 mm. For stainless steel thermometer 48066x-xxx. Outer=Ø12 mm and Inner=Ø9 mm.

Single-stream, cold water meter, type CD/S, dry dial for horizontal and vertical installation - with rotating counter.Qn 1,5 m3/h - Q3=2,5Water meter connections must be purchased (2 x 484900004).

Pressure gauge 1/2xØ100 0-16 bar, LM, stainless steel and brass connection w//glycerine

Pressure gauge 1/2xØ100 0-10 bar, LM, stainless steel and brass connection w//glycerine

Pressure gauge 1/4xØ63 0-6 bar, LM, stainless steel and brass connection w//glycerine

Pressure gauge 1/4XØ63 0-2,5 bar, LM stainless steel and brass connection w/glycerine

Manometer 1/4XØ63 0-10 bar/0-100 MVS, downward stud.

Hydrothermometer 1/2 inch diameter and 80 millimeters long, measuring from 0 to 40 millivolts and from 20 to 120 degrees Celsius.

Stainless steel thermowell, 12 x 100 mm. For stainless steel thermometer 48066x-xxx, Outer=Ø12 mm and Inner=Ø9 mm.

Stainless steel thermometer Ø83 x 100 mm, 0-120° C, accuracy 1, back connection. NB: without thermowell.

Stainless steel thermometer Ø63 x 63 mm, 0-120° C, accuracy 1, back connection. NB: without thermowell.

JCH type 2297 extension niple with controllable check valve 1 male/female threads extend 60 mm.

Stainless steel, hardened, chrome plated.

Disc thermometer Ø63 1/2"x100 mm 0-120°C.

Fästtermometer med 63 mm storlek och ett temperaturintervall på 0-120°C.

Denna termometer är avsedd för fastsättning och ger temperaturindikering i applikationer där en kompakt 63 mm termometer krävs.

Ett praktiskt val för enkel temperaturövervakning.

Manometer 1/2XØ100 0-6 bar/0-60 MVS, downward stud.

Application:Gunmetal are used with all pipe and fitting material. Protects against corrosion in all legal water quality in Denmark.Product description:Nipple part machined in CC499K.Nut machined in CC499K.The materials have been approved in accordance with 4MS UBA list 8th Revision 01.12.2017.Certificates/Test:GDV approved, cert. 03/00121100% quality test.Annual inspection by the Danish Technological Institute.Technical data:Max temperature 900 C.

Manometer 1/2XØ80 0-0.6 bar/0-6 MVS, downward stud.

Technical features Material: Brass Standard EN 12164 / CW614N Scope: Media: Water Temperature: +110 C Pressure: Max. 16 bar Approvals: VA