Förare, Spolar & Transformatorer - sita 3

230V LED stabilizer. Prevents LED light from flashing during dimming.

High quality and robust performanceHigh-quality, compact and lightweight HID electronic gear for optimal and reliable performance of 20, 35, 50 and 70 W CDM lampsProduct Features • Minimal lamp power spread • Low gear energy losses • Lamp end-of-life detection • High Tambient and Tcase temperatures • Long lifetime of 40,000 hours Product Benefits • Optimal lamp performance thanks to minimal lamp power tolerance • CDM lamp life increased by up to 30% • Eliminates all visible lamp flickerApplications • Accent and decorative lighting for shops, public spaces, lobbies and offices • Suitable for indoor use only

An energy-efficient solutionHF-Performer EII PL-T/C/R/T5c is a slim and high-frequency electronic ballast for a wide range of CFL- ni applications. It is ideal for applications where high energy efficiency is required. The HF-Performer EII range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2). Product Benefits • Robust design that meets all relevant international safety and performance standards and ensures good energy efficiency • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping • Suitable for DC emergency operation, 186 to 275 V (at -10 oC) and in line with IEC/EN 60598-22 luminaire normsProduct Features • 50,000-hour lifetime at maximum case temperature, combined with over 60,000 on/off switches on one lamp • Programmed, flicker-free, pre-heated start (< 1.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections. Applications • Ideal for commercial indoor lighting applications where it is necessary to reduce the wattage per square meter or operating costs • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights and recessed fixtures used largely in retail stores, office buildings, supermarkets, hotels, convenience stores • Industrial premises with long operating hours

Transformer 70/1-KT mini 70VA Product description: Single-phase lighting transformer for 12 Volt halogen lighting, designed and manufactured as a safety transformer according to EN61558-2-6. CE marked. Encased in plastic and cast in self-extinguishing polyurethane. Insulation class II - double insulated. Short-circuit proof and protected against overload...

ECG for FL and CFL - not dimmable. Product benefits: • Long lamp life • No adverse effect from frequent on/off switching • Automatic restart after lamp replacement • Perfect lamp start for applications with motion sensors • VDE/VDE EMC certified system • Very high energy efficiency due to cut-off technology • Areas of application: • Emergency lighting systems acc. to EN 50172 / DIN VDE 0108-100, industry, open-plan offices, corridors and storage rooms, public buildings, sports halls and factories, strip lighting • Suitable for emergency lighting (DC operation) • Modernization of existing systems. Product features: • Supply voltage: 220...240 V • Line voltage: 198...264 V • Line frequency: 0 Hz, 50 Hz...60 Hz • Lamp start with optimum filament preheating • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate) • Energy Efficiency Index EEI: A2 BAT • Automatic shutdown of defective lamps and at end of life (EoL T.2) • Safety: to EN 61347-2-3 • Lamp operation: to EN 60929

Mean Well LED power supply, 200W, 24Vdc and Ip67.LED driver is suitable for both indoor and outdoor use and wet rooms due. IP protection class is 67.

Schneider Electric ATV320D15N4B frekvensomriktare Svart

Schneider Electric ATV320U22N4B frekvensomriktare

Snappy LED power supply, 20W, 24Vdc and IP20Super slim LED driver.

Constant Current LED Driver / 30 W
dimmable, 24 V DC for LEDs up to 30 W total load

Snappy LED power supply, 50W, 12Vdc and IP20Super slim LED driver.

An energy-efficient solutionHF-Performer EII PL-T/C/R/T5c is a slim and high-frequency electronic ballast for a wide range of CFL- ni applications. It is ideal for applications where high energy efficiency is required. The HF-Performer EII range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2). Product Benefits • Robust design that meets all relevant international safety and performance standards and ensures good energy efficiency • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping • Suitable for DC emergency operation, 186 to 275 V (at -10 oC) and in line with IEC/EN 60598-22 luminaire normsProduct Features • 50,000-hour lifetime at maximum case temperature, combined with over 60,000 on/off switches on one lamp • Programmed, flicker-free, pre-heated start (< 1.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections. Applications • Ideal for commercial indoor lighting applications where it is necessary to reduce the wattage per square meter or operating costs • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights and recessed fixtures used largely in retail stores, office buildings, supermarkets, hotels, convenience stores • Industrial premises with long operating hours

HF-Regulator II for TL-D lamps – Dimming: a next step in energy savingHigh-frequency electronic dimming ballast, using the analog protocol (1-10 V) for TL-D lampsProduct Benefits • The lamp power can be dimmed from 1 to 100% via the Analog control input (in accordance with the 1-10 V industry standard) • Compliant with European and Asian norms and suitable for emergency lighting systems • HF operation improves light quality, lamp lifetime • Combined with controls, additional energy savings can be achievedProduct Features • Programmed start: flicker-free ignition < 0.5 seconds and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations. • Up to 60% reduction in energy consumption by using automatic lighting control systems • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacementApplications • Indoor, general and task lighting applications in combination with lighting control systems (personal control, daylight linking and/or movement detection)

Snappy LED power supply, 320W, 24Vdc and IP20.LED driver.

LED Transformer 24 V (DC)/15 W
24 V DC for LEDs upt to 15 W total load

LED driver, 20 Watt, 1670 mA

1-phase lighting transformer for 12 Volt halogen lighting, designed and manufactured as safety transformer according to EN61558-2-6. CE mark. Plastic encapsulated and embedded in self-extinguishing polyurethane. Insulation class II - double insulated. Short-circuit-proof and protected against overload with built-in PTC fuse. High and low output voltage. Compact size and easy mounting on ceiling or wall. Standard version is supplied with 2 meter primary cable w / plug. Can be dimmed with dimmer designed for transformer load. Scope: The compact format of the HaloPower Mini series makes it very useful in the furniture industry and in residential and kitchen appliances. Clamp connection max. 4mm2. Possibility of 6 outputs with Halo-Power Mini circuit board. Do not mount in insulation material due to heat.

Transformer300/1-EK halopower 1X300VA Product description: Single-phase lighting transformer for 12 Volt halogen lighting, designed and manufactured as a safety transformer according to EN61558-2-6. CE marked. Encapsulated in plastic and cast in self-extinguishing polyurethane. Insulation class II - double insulated. Short-circuit proof and protected against...

20W driver for LED track with 3000 mm cable and sockets.1-10V dimming.Impulse dimming.NB! Not phase dimming.SG provides 5 year system warranty on the product, which is effective from commissioning.

Product features • Supply voltage: 220...240 V • Line voltage: 198...264 V • Line frequency: 0 Hz, 50 Hz...60 Hz • Lamp start with optimum filament preheating • Automatic shutdown of defective lamps and at end of life (EoL) • Safety: to EN 61347-2-3 • Lamp operation: to EN 60929 • RI suppression: to EN 55015:2006+A1:2007+A2:2009/CISPR 15 • Line harmonics: to EN 61000-3-2 • Immunity: to EN 61547 Product benefits • Perfect lamp start for applications with motion sensors • Automatic restart after lamp replacement Areas of application • Suitable for use in emergency lighting systems as per EN 50172/DIN VDE 0108-100

LED Transformer 12 V (DC)/50 W
12 V DC for LEDs upt to 50 W total load

LED Transformer 24 V (DC)/50 W
24 V DC for LEDs up to 50 W total load

Robust design, compact formHF-Matchbox Red is an affordable, reliable, compact, lightweight and high-frequency ballast for use with system wattages below 25 W in combination with TL mini, TL-D, TL5 and TL5c, PL-T/C, and PL-L/S lamps. The HF-M Red range has a robust design, meets all relevant international safety and performance standards and has an energy efficiency index (CELMA EEI) of A2. Product Benefits • Can be operated with movement-detection control systems. • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping. • Suitable for use in class I or class II luminairesProduct Features • Over 60,000 on/off switches on one lamp (depending on lamp/ballast combination) • Suitable for emergency DC operation between 190 and 254 V • Programmed, flicker-free, pre-heated start (<0.8 s) which allows the lamp to be switched on and off without reducing useful lamp lifeApplication • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights, light boxes, and emergency and security fixtures used largely in retail stores, office buildings, hotels, private homes and residential buildings • Domestic applications such as outdoor garden lighting, garage areas, stairways

Printkort G3642E miniprint 6/K for noratel

Snappy LED power supply, 250W, 24Vdc and IP20.Slim LED driver.