Alu pex-system - sita 3

Uponor 1070547 rörmokeritillbehör Kompressionskoppling

Uponor 1046921 rörmokeritillbehör T-rörstopp

Uponor 1070536 rörmokeritillbehör Armbåge

Uponor 1070532 rörmokeritillbehör Armbåge

Uponor 1006641 rörmokeritillbehör Komprimeringsplugg

HENCO 20X1/2 VISION push straight male adapter for water, heating- and cooling installations, max. 16 bar

Geberit Mepla adapter with female thread: d=16mm, Rp=1/2

Geberit Mepla T-piece with female thread: d=40mm, Rp=1, d1=40mm

Geberit Mepla T-piece with female thread: d=32mm, Rp=1/2, d1=32mm

Geberit Mepla T-piece with female thread: d=26mm, Rp=3/4, d1=26mm

Geberit Mepla T-piece with female thread: d=20mm, Rp=1/2, d1=20mm

Geberit Mepla T-piece, reduced: d=20mm, d1=16mm, d2=16mm

Geberit Mepla T-piece, equal: d=26mm

PPSU coupling Uponor 25X20 mm

Prestee PPSU Uponor 32X20X32 mm

Prestee PPSU Uponor 32X25X25 mm

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 25, d2: 25, d3: 16

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 20, d2: 20, d3: 20

Raxofix T-piece with SC-Contur- silicium bronze- press connectorsd1: 20, d2: 20, d3: 16

Raxofix Connection screw fitting with SC-Contur- for manifold- silicium bronze- press connection, Viega plug-in seatd: 16, G: 34

Raxofix Adapter elbow 90° with SC-Contur- silicium bronze- press connection, R-threadd: 16, R: 12

Raxofix Coupling with SC-Contur- silicium bronze- press connectiond1: 20, d2: 16

Uponor 1029134 rörmokeritillbehör Kranadapter

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Henco 16 x 16 mm PVDF press elbow 90° for water-, heating- and cooling installations. Max. 16 bar.